The Anchor V2 is more than an evolution of an existing design, it is a total rebirth.

The Anchor V2 is built around a multi-butted CrMo bar on which a 3D invest cast stem is directly welded. The closed design of the stem and the fact that the bar is not cut in middle avoid flexing and create a very stiff combination.

The new stem has been totally redesigned to ensure a strong support of the stem on the fork steerer tube. The stem is hollowed which allow to keep the weight down. The welding areas have been specially prepared to ensure a very strong bar/stem joining. The improved design of the clamp allows a large area of contact and spread the clamping force more evenly.

In addition, only one bolt needs to be tighten in order to clamp the bar combo, it is easy and very convenient. No more needs to struggle to find again the exact position of your bar on the stem!

Multi-butted CrMo bar + 3D invest casting CrMo stem + 100% heat treated + Height: 8.25“ + Upsweep: 3“ + Backsweep: 10“ + bar perpendicular to the stem (straight to the fork) + 48mm offset + Weight: 870g + Colours: Gun Grey