Products from CLATCH

→ M10 allen screw for BMX female hubs, in the colour black. Specifications: Allen screw M10 thread Hollow inside , for less weight Colour: black

→ This bell gives you more safety while driving and can easily be mounted on the handlebar. Specifications: "Mini" bell Colour: black Suitable for BMX and Fixie !

→ With this screw the chainwheel gets attached to the crankarm. Specifications: Chainwheel crank screw Colour: black Hex key

→ High-quality BMX crankscrew, with which the crankarms are fixed to the axle. Specifications: Outer thread diameter: 9,4mm Length: 32mm Colour: black 1 piece Hex key Fits to all 19mm KHE axles

→ Crankscrew and washer for fixing the crankarms to the axle. Specifications: Outer diameter: 9,4mm Length: 32mm Washer: 21mm diameter Colour: black Screw + Washer

→ 100 tearproof cabel ties for fixing cables. Specifications: 100 pieces 4,5 x 280mm Black

→Inexpensive BMX Topbolt for 1 1/8" forks with an M10 inner thread. Every fork has to be locked with a topbolt. This topbolt is for 1 1/8 Inch steerer tubes with an M10 inner thread. Thanks to the hole in the bolt, a front brakecable...

→ Red 18" Clatch rim tape,which protects the tube. Specifications: CLATCH rim tape High pressure tape Size: 18" Width: 20mm Colour: red

→ Very lightweight and solid front hub by Clatch, attention 12mm axle! Colour: black Material: steel Bearing: loose ball Axle length: 165mm Axle diameter: 12mm Spoke holes: 48 holes Weight: 420g

→ High-quality lower bearing shell for 1 1/8" loose ball bearing. Specifikations: Colour: chrome Material: 4130 CrMo, thus very stable Weight: 58g 1 1/8" Headset For 1 1/8" loose ball bearings

→ Lightweight CLATCH aluminum pedals in chrome. Specifications: Brand: Clatch Colour: chrome Weight: only 380g! Width : 100mm Size: 1/2" Material: aluminum

→ High-quality Clatch rotor, that is ball beared. Specifications: Colour: black Medium rotor bearing Manufactured out of metall Ball bearing Fits to 1 1/8" frame

→ Solid CLATCH Rotorset without brakecable. Specifications: Three-piece CLATCH rotorset Set contains a rotorring and both caps for screwing in the cables Fits to 1 1/8" headsets

→ Red anodized CLATCH seatclamp with a inner diameter of 28,6mm! Specifications: Colour: red anodized Material: aluminum Inner diameter: 28,6mm Height: 13mm Weight: only 28g! With screw for clamping

→ Five high-quality CLATCH Alu Spacer with a height of 10mm. Specifications: Brand: Clatch Dimensions: 25,4x10mm Colour: black Material: aluminum 5 pieces ! Total weight: only 38g!

→ Five high-quality spacers that are 5mm high and black. Specifications: Brand: Clatch Dimensions: 25,4x5mm Colour: black Material: aluminum 5 pieces !

→ Five high-quality CLATCH spacers with the dimensions 28,6x5mm. Specifications: Brand: Clatch Dimensions: 28,6x5mm Colour: black Material: aluminum 5 pieces !

→ Stable CLATCH BMX spokes (38pcs) with a length of 186mm, in the colour black. Specifications: CLATCH spokes Colour: black Length: 186mm 38 pcs

→ This chromecoloured screws fix the 8-edged cranks to the crankarms. Specifications: M8 For 8-edged crankaxle Hex key needed Two screws (1 Pair)

Fixie grips length: 130mm color: light brown Through his fluted design this grip got some special grip by driving and is optimal for daily using.

Fixie grips The Fixed bike grips in red are very good for daily using because of their robustness and grippy material. Länge: 125mm